| No. |
Part Name |
Description |
Manufacturer |
| 1 |
24C02B |
Note:This product is not recommended for new designs. Please consider 24LC02B instead.The 24C01B is a 2K bit Electrically Erasable PROM memory organized as a single block of 256 x 8-bit with an I2C™ compatible 2-wire serial |
Microchip |
| 2 |
24C16B |
Note:This product is not recommended for new designs. Please consider 24LC16B instead.The 24C16B is an 8K bit Electrically Erasable PROM memory organized as eight blocks of 256 x 8-bit with an I2C™ compatible 2-wire serial |
Microchip |
| 3 |
54FCT574 |
not availablOctal D-Type Flip-Flop with TRI-STATE Outputs |
National Semiconductor |
| 4 |
5962F9583403QXA |
LVDS quad receiver:SMD. QML class Q. Total dose 3E5 rad(Si). Lead finish not solder dipped. |
Aeroflex Circuit Technology |
| 5 |
5962F9583403VXA |
LVDS quad receiver:SMD. QML class V. Total dose 3E5 rad(Si). Lead finish not solder dipped. |
Aeroflex Circuit Technology |
| 6 |
74F109 |
Positive J-Knot positive edge-triggered flip-flops |
Philips |
| 7 |
74LVC245A |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
ST Microelectronics |
| 8 |
74LVC245AM |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
SGS Thomson Microelectronics |
| 9 |
74LVC245AM |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
ST Microelectronics |
| 10 |
74LVC245AMTR |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
SGS Thomson Microelectronics |
| 11 |
74LVC245AMTR |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
ST Microelectronics |
| 12 |
74LVC245ATTR |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
SGS Thomson Microelectronics |
| 13 |
74LVC245ATTR |
LOW VOLTAGE CMOS OCTAL BUS TRANSCEIVER (NOT INVERTED) HIGH PERFORMANCE |
ST Microelectronics |
| 14 |
93C86 |
Note:This product is not recommended for new designs. Please consider 93C86C instead. |
Microchip |
| 15 |
93C86-E/P |
Note:This product is not recommended for new designs. Please consider 93C86C instead. |
Microchip |
| 16 |
93C86-E/SN |
Note:This product is not recommended for new designs. Please consider 93C86C instead. |
Microchip |
| 17 |
93C86T-E/SN |
Note:This product is not recommended for new designs. Please consider 93C86C instead. |
Microchip |
| 18 |
ADC0802 |
A/D Converter, 8-Bit, Error �0.5LSB Vref/2 Not Adjusted, Microprocessor-Compatible |
Intersil |
| 19 |
ADC0804 |
A/D Converter, 8-Bit, Error �1LSB V REF /2 Not Adjusted, Microprocessor-Compatible |
Intersil |
| 20 |
ADC10662CIWM |
10-Bit 360 ns A/D Converter with Input Multiplexer and Sample/Hold [Not recommended for new designs] |
National Semiconductor |
| 21 |
AN222 |
AND / NOR circuit providing the logical function Q = NOT (A.B+C.D+E.F) |
Austria Mikro Systems |
| 22 |
ANT1-M24LR16E |
45 mm x 75 mm antenna reference board for M24LR16E-R, NOT FOR SALE |
ST Microelectronics |
| 23 |
ANT10-M24LR16E |
Antenna reference board for M24LR16E-R with ESD protection, NOT FOR SALE |
ST Microelectronics |
| 24 |
ANT2-M24LR16E |
20 mm x 40 mm antenna reference board for M24LR16E-R, NOT FOR SALE |
ST Microelectronics |
| 25 |
ANT7-M24LR16E |
15 mm x 15 mm double layer antenna reference board for the M24LR16E-R Dual Interface EEPROM, NOT FOR SALE |
ST Microelectronics |
| 26 |
AT76C502A |
AT76C502 is a single-chip Media Access Controller (MAC) that provides all processing and functionality needed for the MAC protocol of wireless LANs (focusing on, but not limited to the IEEE 802.11b standard). This PCMCIA product has been W |
Atmel |
| 27 |
AT89C51 |
80C31 Microcontroller with 4K bytes Flash. Not recommended for new designs. Use AT89S51. |
Atmel |
| 28 |
AT89C52 |
80C32 Microcontroller with 8K bytes Flash. Not recommended for new designs. Use AT89S52. |
Atmel |
| 29 |
AT89LV51 |
2.7-Volt, 80C31 Microcontroller with 4K bytes Flash. Not recommended for new designs. Use AT89LS51. |
Atmel |
| 30 |
AT89LV52 |
2.7-Volt, 80C32 Microcontroller with 8K bytes Flash. Not recommended for new designs. Use AT89LS52. |
Atmel |
| | | |
