| No. |
Part Name |
Description |
Manufacturer |
| 1141 |
AMR960-35HE |
Linear Power Amplifier 35W, 925-960MHz, 26Vcc, designed for Cellular Radio GSM, NMT, E-TACS, AMPS applications |
Motorola |
| 1142 |
AN005 |
Application Note - a 100KHz 50W Switching Regulator (Single-Ended Forward Type) Using the Bipolar Ring Emitter Transistor |
Fujitsu Microelectronics |
| 1143 |
AN1352 |
A LNA OPTIMIZED FOR HIGH IP3OUT AT 1.9GHZ USING THE NPN SI START420 TRANSISTOR |
SGS Thomson Microelectronics |
| 1144 |
AN1438 |
LOW NOISE AMPLIFIER OPTIMIZED FOR MINIMUM NOISE FIGURE AT 1.9GHZ USING START420 |
SGS Thomson Microelectronics |
| 1145 |
AN1465 |
A LNA OPTIMIZED FOR HIGH IP3OUT AT 1.9GHZ USING THE NPN SI START540 TRANSISTOR |
SGS Thomson Microelectronics |
| 1146 |
AN1499 |
ST9 - DESIGNING A LOW COST POWER BOARD FOR THE ST92141 MOTOR CONTROL MCU WITHOUT USING IPMS |
SGS Thomson Microelectronics |
| 1147 |
AN250 |
A SECOND GENERATION IC SWITCH MODE CONTROLLER OPTIMIZED FOR HIGH FREQUENCY |
SGS Thomson Microelectronics |
| 1148 |
AN805 |
Power MOSFETs Optimized for Low-Voltage DC/DC Conversion |
Vishay |
| 1149 |
ANT1-M24LR16E |
45 mm x 75 mm antenna reference board for M24LR16E-R, NOT FOR SALE |
ST Microelectronics |
| 1150 |
ANT10-M24LR16E |
Antenna reference board for M24LR16E-R with ESD protection, NOT FOR SALE |
ST Microelectronics |
| 1151 |
ANT2-M24LR16E |
20 mm x 40 mm antenna reference board for M24LR16E-R, NOT FOR SALE |
ST Microelectronics |
| 1152 |
ANT3-M24LR04E |
SMD-Inductor based antenna reference board for M24LR04E-R |
ST Microelectronics |
| 1153 |
ANT7-M24LR16E |
15 mm x 15 mm double layer antenna reference board for the M24LR16E-R Dual Interface EEPROM, NOT FOR SALE |
ST Microelectronics |
| 1154 |
AS-TQFP44 |
TQFP44 (10x10) socket and cover to solder to an application board for connection of ST emulators. |
ST Microelectronics |
| 1155 |
ASS4148 |
Designed for mounting on small surface. |
Anachip |
| 1156 |
ASS4148BD-0603 |
Designed for mounting on small surface. |
Anachip |
| 1157 |
ASS4148BF-1005 |
Designed for mounting on small surface. |
Anachip |
| 1158 |
AT73C213 |
The AT73C213 is a fully integrated, low-cost combined stereo audio DAC and audio amplifier circuit targeted for Li-ion or Ni-Mh battery-powered ... |
Atmel |
| 1159 |
AT75C140 |
This Smart Internet Appliance Processor is a high-performance processor specially designed for network-enabling consumer and industrial applications. The specific architecture of this device delivers unmatched performance for low power con |
Atmel |
| 1160 |
AT75C220 |
A high-performance processor specially designed for professional Internet appliance applications, such as Ethernet IP phone. The device is built around an ARM7TDMI microcontroller with two Ethernet MAC interfaces. |
Atmel |
| 1161 |
AT76C502A |
AT76C502 is a single-chip Media Access Controller (MAC) that provides all processing and functionality needed for the MAC protocol of wireless LANs (focusing on, but not limited to the IEEE 802.11b standard). This PCMCIA product has been W |
Atmel |
| 1162 |
AT86RF210 |
The AT86RF210 Z-Link� Transceiver is an 868/915 MHz direct sequence spread spectrum BPSK transceiver designed for IEEE 802.15.4/ZigBee�-based systems; supports data rates of 20 kbps and 40 kbps, respectively. |
Atmel |
| 1163 |
AT86RF211 |
ASSP for ISM - 400 to 950 MHz ISM Band, Up to 64K-bits/second Data Rate, FSK Modulation, Single Chip Transceiver for robust Wireless Low-cost Applications optimized for License Free in ISM bands. |
Atmel |
| 1164 |
AT86ZL3201 |
The AT86ZL3201 Z-Link� Controller is an 8-bit AVR� Microcontroller customized for IEEE 802.15.4/ZigBee� for wireless monitor and control applications; supports the 868/915 MHz and 2.4 GHz bands with data rates of 20 kbps, 40 kbps, and 250 |
Atmel |
| 1165 |
AT89C51 |
80C31 Microcontroller with 4K bytes Flash. Not recommended for new designs. Use AT89S51. |
Atmel |
| 1166 |
AT89C51AC3 |
8-bit microcontroller with A/D converter and 64-Kbyte Flash. 2-Kbyte RAM, 2-Kbyte EEPROM, SPI. Power Fail Detect (no need for external ... |
Atmel |
| 1167 |
AT89C51CC03 |
8-bit microcontroller with CAN controller and 64-Kbyte Flash. 2-Kbyte RAM, 2-Kbyte EEPROM, SPI. Power Fail Detect (no need for external brown- out). Pinout compatible with T89C51CC01. |
Atmel |
| 1168 |
AT89C52 |
80C32 Microcontroller with 8K bytes Flash. Not recommended for new designs. Use AT89S52. |
Atmel |
| 1169 |
AT89LV51 |
2.7-Volt, 80C31 Microcontroller with 4K bytes Flash. Not recommended for new designs. Use AT89LS51. |
Atmel |
| 1170 |
AT89LV52 |
2.7-Volt, 80C32 Microcontroller with 8K bytes Flash. Not recommended for new designs. Use AT89LS52. |
Atmel |
| | | |
