| No. |
Part Name |
Description |
Manufacturer |
| 151 |
STEVAL-CBP006V1 |
UniPower front panel and standby power management controller for STB, TV sets and other consumer devices |
ST Microelectronics |
| 152 |
STR91X-SK/RAI |
Low-cost Raisonance REva starter kit for STR91xF with RLink in-circuit debugger/programmer (USB host interface), REva mother boa |
ST Microelectronics |
| 153 |
TC1142 |
The TC1142 generates a regulated negative voltage from –3V to –5V at 20 mA from an input of 2.5V to 5.5V, using only three external capacitors. Other boost/buck switching regulators must use an inductor, which is larger and rad |
Microchip |
| 154 |
TC1410 |
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. T |
Microchip |
| 155 |
TC1410N |
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. T |
Microchip |
| 156 |
TC1411 |
The TC1411/1411N are 1A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 157 |
TC1411N |
The TC1411/1411N are 1A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 158 |
TC1412 |
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 159 |
TC1412N |
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 160 |
TC1413 |
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin |
Microchip |
| 161 |
TC1413N |
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin |
Microchip |
| 162 |
TC4403 |
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. The load is intended to be connected between the outputs without other reference to supply or ground. Then, |
Microchip |
| 163 |
TC642 |
The TC642 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation. A thermistor (or other voltage output temperature sensor) connected to t |
Microchip |
| 164 |
TC646 |
The TC646 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation(PWM). A thermistor (or other voltage output temperature sensor)connected |
Microchip |
| 165 |
TC647 |
The TC647 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation. A thermistor (or other voltage output temperature sensor) connected to V |
Microchip |
| 166 |
TC648 |
The TC648 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation(PWM). A thermistor (or other voltage output temperature sensor) connected |
Microchip |
| 167 |
TC649 |
The TC649 is a switch mode fan speed controller for use with brushless DC motors. Temperature proportional speed control is accomplished using pulse width modulation(PWM). A thermistor (or other voltage output temperature sensor) connected |
Microchip |
| 168 |
TC72 |
The TC72 is a digital temperature sensor capable of reading temperatures from -55�C to +125�C. The sensor features a simple, SPI compatible serial interface that allows communication with a host controller or other peripherals. The TC72 do |
Microchip |
| 169 |
TC7652 |
The TC7652 is a lower noise version of the TC7650, sacrificing some input specifications (bias current and bandwidth)to achieve a 10x reduction in noise.All the other benefits of the chopper technique are present,i.e.freedom from offset ad |
Microchip |
| 170 |
TCA490 |
DUAL OPERATIONAL AMPLIFIER, for use as a stereo preamplifier, among other things |
VALVO |
| 171 |
TCM1617 |
Datasheet and Other Documentation |
Microchip |
| 172 |
TCN75 |
The TCN75 is a serially programmable temperature sensor that notifies the host controller when ambient temperature exceeds a user-programmed setpoint. Hysteresis is also programmable. The INT/CMPTR output is programmable as either a simple |
Microchip |
| 173 |
TIP-4131SCE |
12.1in Infrared Touch Panel, Fast response time < 50mS, 81 x 61 switch matrix, nearly 5000 switches, Fits Sharp LQ121S1DG11 and other 12.1in displays, Sealed for environmental resistance, RS-232 interface |
Vishay |
| 174 |
TYPE TE |
Aluminum Capacitors, Littl-lytic®, Electrolytics, Dependable performance in industrial and electronic equipment with either transistor or modified electron-tube circuits |
Vishay |
| 175 |
U10LC48 |
RECTIFIER SILICON DIFFUSED TYPE INVERTER EQUIPMENT FOR AC MOTOR CONTROL CHOPPER EQUIPMENT FOR DC MOTOR CONTROL OTHER POWER CONVERSION EQUIPMENT |
TOSHIBA |
| | | |
