No. |
Part Name |
Description |
Manufacturer |
211 |
MAX490C_D |
Low-power, slew-rate-limited RS-485/RS-422 transceiver. Full-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - no. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
MAXIM - Dallas Semiconductor |
212 |
MAX850C_D |
Low-noise, regulated, negative charge-pump power supplies for GaAsFET bias. 2mVp-p output voltage ripple. 100kHz chage-pump switching frequency. Logic-level shutdown mode: 1microA max over temp. |
MAXIM - Dallas Semiconductor |
213 |
MCP6001 |
The MCP6001 is a single general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6001 is ava |
Microchip |
214 |
MCP6002 |
The MCP6002 is a dual general purpose op amp offering rail to rail input & output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6002 is avail |
Microchip |
215 |
MCP6004 |
The MCP6004 is a quad general purpose op amp offering rail-to-rail input and output over the 1.8 to 5.5V operating range. This amplifier has a typical GBWP of 1 MHz with typical quiescent current of 100 microamperes. The MCP6004 is availab |
Microchip |
216 |
MCP6141 |
The MCP6141 is a single 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. |
Microchip |
217 |
MCP6142 |
The MCP6142 is a dual 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. |
Microchip |
218 |
MCP6143 |
The MCP6143 is a single with chip select 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. |
Microchip |
219 |
MCP6144 |
The MCP6144 is a quad 600nA op amp offering rail to rail input & output over the 1.4 to 5.5V operating range. This amplifier has a typical GBWP of 100kHz with a maximum quiescent current of 1 microampere. |
Microchip |
220 |
MCP6541 |
The MCP6541 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC, MSOP and five le |
Microchip |
221 |
MCP6541RT |
Push-Pull Output Sub-Microamp Comparators |
Microchip |
222 |
MCP6541T |
Push-Pull Output Sub-Microamp Comparators |
Microchip |
223 |
MCP6542 |
The MCP6542 is a Push-pull, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package. |
Microchip |
224 |
MCP6542T |
Push-Pull Output Sub-Microamp Comparators |
Microchip |
225 |
MCP6543 |
The MCP6543 is a Push-pull, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the eight lead PDIP, SOIC and MSOP package, |
Microchip |
226 |
MCP6543T |
Push-Pull Output Sub-Microamp Comparators |
Microchip |
227 |
MCP6544 |
The MCP6544 is a Push-pull, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp. This device is offered in the 16 lead PDIP, SOIC and 14 lead TSSOP pack |
Microchip |
228 |
MCP6544T |
Push-Pull Output Sub-Microamp Comparators |
Microchip |
229 |
MCP6546 |
The MCP6546 is an Open-Drain, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the eight lead |
Microchip |
230 |
MCP6547 |
The MCP6547 is an Open Drain, dual comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the eight lead PD |
Microchip |
231 |
MCP6548 |
The MCP6548 is an Open Drain, single comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the eight lead |
Microchip |
232 |
MCP6549 |
The MCP6549 is an Open Drain, quad comparator. This single-ended device operates from 1.6V to 5.5V, with typical quiescent current of 600 nA and a maximum of 1 microamp and is 10V output capable. This device is offered in the sixteen lead |
Microchip |
233 |
MRA0610 |
MICroAMP 3-9-18-40W, Broadband 600-1000MHz, Internally Compensated, Gold Metalized, MTTF Data |
TRW |
234 |
MRA0610-18 |
MICroAMP 18W, Broadband 600-1000MHz, Internally Compensated, Gold Metalized, MTTF Data |
TRW |
235 |
MRA0610-3 |
MICroAMP 3W, Broadband 600-1000MHz, Internally Compensated, Gold Metalized, MTTF Data |
TRW |
236 |
MRA0610-40 |
MICroAMP 40W, Broadband 600-1000MHz, Internally Compensated, Gold Metalized, MTTF Data |
TRW |
237 |
MRA0610-9 |
MICroAMP 9W, Broadband 600-1000MHz, Internally Compensated, Gold Metalized, MTTF Data |
TRW |
238 |
MRA1014 |
MICroAMP 2-6-12-35W, Broadband 1000-1400MHz, internally compensated, gold metalized, diffused ballast resistors |
TRW |
239 |
MRA1014-12 |
MICroAMP 12W, Broadband 1000-1400MHz, internally compensated, gold metalized, diffused ballast resistors |
TRW |
240 |
MRA1014-2 |
MICroAMP 2W, Broadband 1000-1400MHz, internally compensated, gold metalized, diffused ballast resistors |
TRW |
| | | |