No. |
Part Name |
Description |
Manufacturer |
2131 |
SIP825ZEUDT-TR1 |
5-Pin UP Reset Circuits with Watchdog Timer and Manual Reset |
Vishay |
2132 |
SMFR-29C516E-31SB |
16 Bit Flow Through EDAC Error Detection And Correction unit |
Atmel |
2133 |
SMKR-29C516E-31SB |
16 Bit Flow Through EDAC Error Detection And Correction unit |
Atmel |
2134 |
SN11086 |
3.3 V, Second generation USB1.1 flash memory controller |
SONiX Technology Company |
2135 |
SN11087 |
Second Generation USB1.1 Flash Memory Controller |
SONiX Technology Company |
2136 |
SST-SALEM1P-EV |
Single Phase Meter Evaluation Unit using the ADSST-EM-1011 Chipset |
Analog Devices |
2137 |
SST-SALEM3P-EV |
Evaluation Unit for Low Cost Polyphase Meter |
Analog Devices |
2138 |
STEVAL-IFS017V3 |
Temperature sensor daughter card based on the STTS751-1DP3F in UDFN package |
ST Microelectronics |
2139 |
STEVAL-IHM033V1 |
Control stage based on the STM32F100CB microcontroller for motor control with serial communication user interface |
ST Microelectronics |
2140 |
STEVAL-ISA143V1 |
12 V - 150 W resonant converter with synchronous rectification using the L6563H, L6699 and SRK2000 |
ST Microelectronics |
2141 |
STEVAL-TDR001V1 |
4 W / 380 - 512 MHz reference design using PD84001 + PD54003L-E + LPF |
ST Microelectronics |
2142 |
STEVAL-TDR003V1 |
5 W / 135 - 175 MHz reference design using PD84001 + PD54008L-E + LPF |
ST Microelectronics |
2143 |
STEVAL-TDR004V1 |
400 W / 1.6 - 54 MHz reference design using 2x SD2933 |
ST Microelectronics |
2144 |
STEVAL-TDR006V1 |
4 W / 400 - 470 MHz reference design using PD84001 + PD84008L-E + LPF |
ST Microelectronics |
2145 |
STEVAL-TDR007V1 |
200 W / 1030 MHz IFF Mode-S reference design using PD57002-E, PD57018-E and 2x PD57060-E |
ST Microelectronics |
2146 |
STEVAL-TDR009V1 |
650 W / 88 - 108 MHz reference design using 2x SD2932 |
ST Microelectronics |
2147 |
STEVAL-TLL006V2 |
New high-power LED driver demo board for single flash with I�C interface based on STCF06 (with motherboard based on uPSD) |
ST Microelectronics |
2148 |
SYMBOLS |
Symbols for diodes and transistors in VALVO Halbleiterdioden und Transistoren 1964 |
VALVO |
2149 |
T7237 |
ISDN U-interface transceiver |
Agere Systems |
2150 |
TC1219 |
The TC1219/1220 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input voltage which can range from +2.5V to +5.5V. Conversion efficiency is typically >95%. Switching frequenc |
Microchip |
2151 |
TC1219ECHTR |
The TC1219/1220 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input ... |
Microchip |
2152 |
TC1220 |
The TC1219/1220 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input voltage which can range from +2.5V to +5.5V. Conversion efficiency is typically >95%. Switching frequenc |
Microchip |
2153 |
TC1220ECHTR |
The TC1219/1220 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input ... |
Microchip |
2154 |
TC1221 |
The TC1221/1222 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input voltage which can range from +1.8V to +5.5V. Conversion efficiency is typically 96%. Switching frequency is |
Microchip |
2155 |
TC1221ECHTR |
The TC1221/1222 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input ... |
Microchip |
2156 |
TC1222 |
The TC1221/1222 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input voltage which can range from +1.8V to +5.5V. Conversion efficiency is typically 96%. Switching frequency is |
Microchip |
2157 |
TC1222ECHTR |
The TC1221/1222 are CMOS "charge-pump" voltage converters in ultra-small 6-Pin SOT-23A packages. They invert and/or double an input ... |
Microchip |
2158 |
TC1266 |
The TC1266 is an application-specific, low dropout regulator (LDO) specifically intended for use in PCI peripheral card applications complying with PCI Power Management (PCI 2.0). It provides an uninterrupted, 3.3V, 200mA (max) output volt |
Microchip |
2159 |
TC1267 |
The TC1267 is an application-specific, low dropout regulator (LDO) specifically intended for use in PCI peripheral card applications complying with PCI Power Management (PCI 2.0). It provides an uninterrupted, 3.3V output voltage when the |
Microchip |
2160 |
TC1410 |
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. T |
Microchip |
| | | |