| No. |
Part Name |
Description |
Manufacturer |
| 2761 |
STM32CubeF2 |
Embedded software for STM32 F2 series (HAL low level drivers, USB, TCP/IP, File system, RTOS, Graphic - coming with examples running on ST boards) |
ST Microelectronics |
| 2762 |
STM32CubeF3 |
Embedded software for STM32 F3 series (HAL low level drivers, USB, File system, RTOS, Touch Sensing, Graphic - coming with examples running on ST boards) |
ST Microelectronics |
| 2763 |
STM32CubeF4 |
Embedded software for STM32 F4 series (HAL low level drivers, USB, TCP/IP, File system, RTOS, Graphic - coming with examples running on ST boards) |
ST Microelectronics |
| 2764 |
STM32CubeL0 |
Embedded software for STM32 L0 series (HAL low level drivers, USB, File system, RTOS, Touch Sensing - coming with examples running on ST boards) |
ST Microelectronics |
| 2765 |
STM32CubeL1 |
Embedded software for STM32 L1 series (HAL low level drivers, USB, File system, RTOS, Touch Sensing, Graphic - coming with examples running on ST boards) |
ST Microelectronics |
| 2766 |
STM8T14X-SB |
Socket board to enable programming of STM8T141/142 devices in SO8 or DFN8 packages |
ST Microelectronics |
| 2767 |
TA7137P |
PRE-AMPLIFIER(RECORDING OR PLAYING-BACK WITH ALC TRANSISTOR FOR TAPE RECORDER) |
TOSHIBA |
| 2768 |
TA7137ST |
V(cc): 15V; 200mW; preamplifier (recording or playing-back) with ALC transistor for tape recorder |
TOSHIBA |
| 2769 |
TC1044S |
The TC1044S is a pin-compatible upgrade to the Industry standard TC7660 charge pump voltage converter. It converts a +1.5V to +12V input to a corresponding –1.5V to –12V output using only two low cost capacitors, eliminating in |
Microchip |
| 2770 |
TC1142 |
The TC1142 generates a regulated negative voltage from –3V to –5V at 20 mA from an input of 2.5V to 5.5V, using only three external capacitors. Other boost/buck switching regulators must use an inductor, which is larger and rad |
Microchip |
| 2771 |
TC1142-3.0EUA |
The TC1142 generates a regulated negative voltage from –3V to –5V at 20 mA from an input of 2.5V to 5.5V, using only ... |
Microchip |
| 2772 |
TC1142-4.0EUA |
The TC1142 generates a regulated negative voltage from –3V to –5V at 20 mA from an input of 2.5V to 5.5V, using only ... |
Microchip |
| 2773 |
TC1142-4.0EUATR |
The TC1142 generates a regulated negative voltage from –3V to –5V at 20 mA from an input of 2.5V to 5.5V, using only ... |
Microchip |
| 2774 |
TC1142-5.0EUA |
The TC1142 generates a regulated negative voltage from –3V to –5V at 20 mA from an input of 2.5V to 5.5V, using only ... |
Microchip |
| 2775 |
TC1410 |
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. T |
Microchip |
| 2776 |
TC1410N |
The TC1410/1410N are 0.5V CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. T |
Microchip |
| 2777 |
TC1411 |
The TC1411/1411N are 1A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 2778 |
TC1411N |
The TC1411/1411N are 1A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 2779 |
TC1412 |
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 2780 |
TC1412N |
The TC1412/1412N are 2A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity occurs on the ground pin. The |
Microchip |
| 2781 |
TC1413 |
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin |
Microchip |
| 2782 |
TC1413N |
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin |
Microchip |
| 2783 |
TC3827 |
The TC3827 is a battery charger controller for a single cell Li-Ion battery. Using an external PMOS transistor, safe and fast charging of a single Li-Ion cell is accomplished. Features include over-current foldback, charge current monitor, |
Microchip |
| 2784 |
TC4403 |
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. The load is intended to be connected between the outputs without other reference to supply or ground. Then, |
Microchip |
| 2785 |
TC4403CPA |
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. ... |
Microchip |
| 2786 |
TC4403EPA |
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. ... |
Microchip |
| 2787 |
TC4403MJA |
The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. ... |
Microchip |
| 2788 |
TC7660 |
The TC7660 is a pin-compatible replacement for the Industry standard TC7660 charge pump voltage converter. It converts a +1.5V to +10V input to a corresponding – 1.5V to -10V output using only two low-cost capacitors,eliminating indu |
Microchip |
| 2789 |
TC7660H |
The TC7660H is a pin-compatible,high frequency up-grade to the Industry standard TC7660 charge pump voltage converter.It converts a +1.5V to +10V input to a corresponding – 1.5V to – 10V output using only two low--cost capacito |
Microchip |
| 2790 |
TC7660S |
The TC7660S is a pin-compatible upgrade to the Industry standard TC7660 charge pump voltage converter. It converts a +1.5V to +12V input to a corresponding -1.5V to -12V output using only two low-cost capacitors, eliminating inductors and |
Microchip |
| | | |
