| No. |
Part Name |
Description |
Manufacturer |
| 691 |
74LVT543 |
3.3V Octal latched transceiver with dual enable (3-State) |
Philips |
| 692 |
74LVT543D |
3.3V Octal latched transceiver with dual enable (3-State) |
NXP Semiconductors |
| 693 |
74LVT543D |
3.3V Octal latched transceiver with dual enable 3-State |
Philips |
| 694 |
74LVT543DB |
3.3V Octal latched transceiver with dual enable (3-State) |
NXP Semiconductors |
| 695 |
74LVT543DB |
3.3V Octal latched transceiver with dual enable 3-State |
Philips |
| 696 |
74LVT543PW |
3.3V Octal latched transceiver with dual enable (3-State) |
NXP Semiconductors |
| 697 |
74LVT543PW |
3.3V Octal latched transceiver with dual enable 3-State |
Philips |
| 698 |
74LVT543PWDH |
3.3V Octal latched transceiver with dual enable 3-State |
Philips |
| 699 |
74LVT623 |
3.3 V octal transceiver with dual enable, non-inverting (3-State) |
Philips |
| 700 |
74LVT623D |
3.3 V octal transceiver with dual enable 3-State |
Philips |
| 701 |
74LVT623DB |
3.3 V octal transceiver with dual enable 3-State |
Philips |
| 702 |
74LVT623PW |
3.3 V octal transceiver with dual enable 3-State |
Philips |
| 703 |
74LVT623PWDH |
3.3 V octal transceiver with dual enable 3-State |
Philips |
| 704 |
7ABT543APWDH |
Octal latched transceiver with dual enable 3-State |
Philips |
| 705 |
7LVC623APWDH |
Octal transceiver with dual enable 3-State |
Philips |
| 706 |
93H72 |
High Speed 4-BIT Shift Register (With Enable) |
Fairchild Semiconductor |
| 707 |
96103 |
Quad BUS Transceiver (With Common Enable) |
Fairchild Semiconductor |
| 708 |
AAT4702IXS-1-T1 |
Auto-Restarting Current Limiting Load Switch with LDO Regulator Active Low Enabled |
Skyworks Solutions |
| 709 |
AAT4702IXS-2-T1 |
Auto-Restarting Current Limiting Load Switch with LDO Regulator Active High Enabled |
Skyworks Solutions |
| 710 |
AC162834ADGG |
18-bit registered driver with inverted register enable and 30ohm termination resistors 3-State |
Philips |
| 711 |
ACH16652DGG |
16-bit transceiver/register with dual enable; 3-state |
Philips |
| 712 |
ACH16823DGG |
18-bit bus-interface D-type flip-flop with reset and enable 3-State |
Philips |
| 713 |
ACH16823DL |
18-bit bus-interface D-type flip-flop with reset and enable 3-State |
Philips |
| 714 |
ADM1491E |
5 V, 16 Mbps, ESD Protected, Full-Duplex RS-485 Transceiver (with Driver/Receiver Enable) |
Analog Devices |
| 715 |
ADM206 |
0.1 �F, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers, 3 Receivers, a Shutdown Pin and an Enable Pin |
Analog Devices |
| 716 |
ADM209 |
0.1 �F, +5V CMOS RS-232 200kBPS Transceiver with 3 Drivers, 5 Receivers & an Enable pin |
Analog Devices |
| 717 |
ADM211E |
EMI/EMC Compliant, �15kV Protected, RS-232 230kBPS Transceiver with 4 Drivers, 5 Receivers and Shutdown and Enable Pins |
Analog Devices |
| 718 |
ADM213 |
0.1 �F, +5V CMOS RS-232 200kBPS Transceiver with 4 Drivers, 5 Receivers, Shutdown and Enable Pins and 2 Receivers Active in Shutdown |
Analog Devices |
| 719 |
ADM223 |
+5V CMOS RS-232 Transceiver with 4 Drivers, 5 Receivers and Shutdown and Enable Pins |
Analog Devices |
| 720 |
ADM235L |
Low Power, +5V CMOS RS-232 Transceiver with 5 Drivers, 5 Receivers, Shutdown and Enable Pins. No External Capacitors Required |
Analog Devices |
| | | |
